| | | | | | | | | Item Specifics - Item Condition | | | Condition: | New | | | | |
| | Camera Type : | Wireless Cameras | | Product Type : | Surveillance & Spy Cameras | | | | | Number of Channels : | 4 Channel | | | | | | |
|
| | |
| |
| | | |
Brand New Wireless Camera Kit 2.4GHz, 1/3 inch Chip, 420TV Lines, 8mm Lens Security CCTV Wireless CCD Color Camera and 2.4GHz 4-Channel Remote Wireless Audio and Video Receiver
Camera Model: WRC810Receiver:WCM711

| Transmission Frequency: | | ISM 2.414 ~ 2.468 GHz
| | Transmission Power: | | 10mW/CE; 2mW/FCC | | Unobstructed Effective Range: | | Over 100 m
| | Modulation Mode: | | FM | | Operating Temperature: | | -10 ~ +50(Degree C) / +14 ~ +122(Degree F) | | Storage Temperature: | | -20 ~ +60(Degree C) / -4 ~ +140(Degree F) | | Operating Humidity: | | ≤85%RH | | Imaging Sensor Type: | | 1/3 inch CCD | | Picture Total Pixels: | | PAL:628 x 582 Pixels; NTSC: 510 x 492 Pixels | | Horizontal Resolution: | | 420 TV Lines | | View Angle: | | PAL: 60° NTSC: 40° | | Minimum Illumination: | | 0Lux | | Band Width: | | 20M | | Angular Field of View: | | 45° (F=8mm) | | Power Supply: | | DC12V | | Receiving Frequency: | | ISM 2,400 ~ 2,483MHz | | intermediate Frequency: | | 480MHz | | Frequency Stabilization: | | ±100KHz | | Demodulation Mode: | | FM | | Antenna: | | 50 ohm SMA | | Receiving Sensitivity: | | ≤-85dBm | | Video Output: | | 1Vp-p @ 75Ω, S/N>38dM | | Audio Output: | | 3Vp-p @ 600Ω | | Operation Temperature: | | -10 ~ +50 / +14 ~ +122?C / ?F | | Operation Humidity: | | 85%RH | | Power Supply: | | DC +12V | | 1. | 420TV lines clear picture display. | | 2. | 4-channel available to Channel scan and channel skip for multi-camera usage. | | 3. | Built-in microphone for audio monitoring. | | 4. | Min. 100m transmission distance without block. | | 1. | Put the Camera in the place where need to monitor. | | 2. | Insert power Adapter, the DC Output Plug of power Adapter in the power Input jack of the Receiver. | | 3. | Use the AV Cable to connect one Channel of Audio and Video Input plugs of the TV set or Monitor. | | 4. | Press the off/on key of the Remote Control, or press the Channel key of the Receiver and open the power Adapter of the Receiver. The Receiver will acquiesce the Channel 1 after opening. | | 5. | Press the Channel key (marked No.1, 2, 3 and 4) of the remote control and make the Frequency of the Receiver corresponding to the transmitter Frequency of the Receiver. | | 6. | Can see the Video and listen to the voice through the television or monitor, adjust the place of the Camera, aiming at the monitoring object then can make the valid monitor. | | 7. | Press the ON/OFF key of the remote control, or press the Channel button on the Receiver for 3 seconds to turn off the power of the Receiver. | | | The Problems And The Solutions : | | 1. | The indicator of the Channel display window is not lighting. Check whether the socket of the power Adapter works well or not, and make sure the power switch is turning on. | | 2. | The Receiver cannot receive picture or the picture-received flashes. | | a. | Please check whether the Wireless Camera have already put through the power. | | b. | Whether the distance between Wireless Camera and Receiver is too far or whether there is Electromagnetic shielding Barrier between Wireless Camera and Receiver (eg: Building of steel structure will make much hindrance to transmitting signal). | | c. | In the Range of Receiving, Don't make two Wireless Cameras with the same Frequency work at the same time, otherwise they will cause interfering. | | d. | When the transmitting Cameras of different Frequency work at the same time, the distance between the Cameras should be kept about or over 2 meters, otherwise receiving will be interfered. | | e. | If there are high-power transmission signals with the same Frequency and Car-mounted Radio working around, they will cause. | | 1 x 2.4GHz 4-Channel Remote Wireless AV Receiver | | 1 x Antenna for Receiver | | 1 x 2.4GHz, 1/3 inch Chip, 420TV Lines, Security CCTV Wireless CCD Color Camera | | 1 x Bracket for Camera | | 1 x AV Cable | | 1 x DC12V Adapter for Receiver | | 2 x DC12V Adapter for Camera | | 1 x Remote Control |
Product Model: WRC810+WCM711Item Code: - - RICO International Trade Group - Frelighsburg QC Shipping: TO ANY COUNTRY US$ 9.95 by AIR with Tracking number Time: Shipping will be within 3 -5 business days by AIR Service. However delivery may take 2 - 4 weeks, because we made sure that You will NOT pay any Duty or Taxes or Custom Fees for any of our purchases. For this reason in your country items on Hold on Custom.
  
Please, CHECK our BEST OFFERS and OTHER ITEMS! Terms & Conditions Please read before bidding. By bidding on this auction you agree to the following terms. 1.Our business hours are Monday. thru Friday. 9:00am to 3:00pm EST. We are closed Sat, Sun. and holidays of our team offices in Greece, Russia, China, USA, Canada. All emails will be answered, all payments will be processed, and all packages will be shipped only during our business hours. Any emails you send us should include an eBay item #, your UserID and email address registered with eBay. 2. We can Ship via FedEx, DHL, Purolator, UPS and other Express Delivery Service include FedEx 2 days delivery for an additional fee. 2.1. Buyer pays full amount for shipping, insurance, and handling fee for this item to be shipped via Hong Kong Post Service or Canada Post or Russian Post Service or KLM Air Shipping Service depend on item. 2.2. Insurance and/or Shipping is the part of price of item and required, cannot be optional, and is non-neogotiable. 3. All prices and payments are in US currency. We accept Paypal, other type of payments (contact us for more information). 3.1. We do not accept personal/company checks. No pickups, no exceptions due to warehouse regulations. 4. All sales final, exchanges for same-item only. 5. If the item stated as brand new is found defective on arrival or incorrect item was shipped, buyer understands that the product will be repaired or replaced at seller's discretion, and be given a reasonable amount of time. All presumed defective or wrong items must obtain a Return Merchandise Authorization Number before returning. Any returned package without an RMA# will be refused. Buyer is responsible for return shipping costs and insurance. Warranties are offered by the manufacturer and will be honored by the manufacturer. All shipping and handling fees will not be returned in any case. 6. After buyer receive item he/she must leave feedback and receive feedback from seller. 7. Shipping will be within 3 -5 days from any RICO International Trade Group team office or directly from factory and only after full payment. 7. By bidding, buyer commit to buy this item from the seller if he/she is the winning bidder and agreed with terms and conditions of this item.
|
00080
|