GG-ST Sunflower Seed Hulling Machine

D:190 mm; Minimum Buy Quantity:N/A; Characteristic rolling element frequency, BSF:6.9 Hz; rs min:2.1 mm; d:105 mm; Max operating temperature, Tmax:120 °C; Weight / Kilogram:4.32; Da max:179 mm; Product Group:B04144; Mass (without HJ ring):4.32 kg;

H1:20 mm; H:105 mm; B:41.2 mm; T max.:200 °C; s1:20.6 mm; N:17mm; Weight:3.2 kg; Designation of housing:PH209N-; G:M6x1; Designation of open end cover:SCOU209-27;

Bolt Size:4 x M16; Bearing UPC:013992026248; Dimension L:5.8 in; Note:This product line wa; Bearing Type:Split Cylindrical Ex; Dimension P:0.7 in; Cr - Dynamic Load Rating:42039 lbf; Bearing Number:LSE303BX; Shaft Size:3-3/16 in; Dimension N:8.5 in;

D:190 mm; Minimum Buy Quantity:N/A; Characteristic rolling element frequency, BSF:6.9 Hz; rs min:2.1 mm; d:105 mm; Max operating temperature, Tmax:120 °C; Weight / Kilogram:4.32; Da max:179 mm; Product Group:B04144; Mass (without HJ ring):4.32 kg;

H1:20 mm; H:105 mm; B:41.2 mm; T max.:200 °C; s1:20.6 mm; N:17mm; Weight:3.2 kg; Designation of housing:PH209N-; G:M6x1; Designation of open end cover:SCOU209-27;

Bolt Size:4 x M16; Bearing UPC:013992026248; Dimension L:5.8 in; Note:This product line wa; Bearing Type:Split Cylindrical Ex; Dimension P:0.7 in; Cr - Dynamic Load Rating:42039 lbf; Bearing Number:LSE303BX; Shaft Size:3-3/16 in; Dimension N:8.5 in;

Min operating temperature, Tmin:-20 °C; Bearing ring (outer ring) GS mass:0.1 kg; Brand:NTN; D:60 mm; rs min:1 mm; Max operating temperature, Tmax:120 °C; D1:30 mm; B:6.25 mm;

d1:80 mm; G:M6x1; L:150 mm; T max.:100 °C; Adapter sleeve reference:H2312; s1:31 mm; Designation of housing:PG212N-; Designation of bearing:UK212G2H; d:55 mm; H2:138 mm;

Z:75.1 mm; H:120 mm; Designation of bearing:LK210G2H; L:320 mm; B:22 mm; d1:70 mm; G:R1/8"; d:50 mm; A:31 mm; A5:25.2 mm;

d1:80 mm; G:M6x1; L:150 mm; T max.:100 °C; Adapter sleeve reference:H2312; s1:31 mm; Designation of housing:PG212N-; Designation of bearing:UK212G2H; d:55 mm; H2:138 mm;

d1:80 mm; G:M6x1; L:150 mm; T max.:100 °C; Adapter sleeve reference:H2312; s1:31 mm; Designation of housing:PG212N-; Designation of bearing:UK212G2H; d:55 mm; H2:138 mm;

A1:13 mm; Recommended tightening torque for set screw:8 Nm; S:9 mm; G:R1/8"; e:24 mm; A:39.5 mm; C:29.6 kN; Weight:2 kg; T max.:100 °C; Designation of housing:FE208N-;

e - ISO Factor8:0.35; Design Units:Imperial; K - Factor7:1.66; G1 - Heat Generation Factor (Roller-Raceway):20.3; R - Cone Backface To Clear Radius1:3.560 mm; Cone Part Number:M38547; G2 - Heat Generation Factor (Rib-Roller End):12.9; Aa - Cage-Cone Backface Clearance:-0.3 mm; Cage Type:Stamped Steel; Ab - Cage-Cone Frontface Clearance:3.3 mm;

Bolt Size:4 x M16; Bearing UPC:013992026248; Dimension L:5.8 in; Note:This product line wa; Bearing Type:Split Cylindrical Ex; Dimension P:0.7 in; Cr - Dynamic Load Rating:42039 lbf; Bearing Number:LSE303BX; Shaft Size:3-3/16 in; Dimension N:8.5 in;

Width T(mm):30 ～ 70; Bearing Retained:Yes (with retaining; Flange Shape:Square Type; Housing Material:1045 Carbon Steel; Holder Surface Treatment:Electroless Nickel P; Number of Bearings:Double; Bearing I.D. d(mm):15; Bearing Used:Deep Groove Ball Bea; Shape:Flanged Pilot Type; Bearing Part Number:6902;