Petroleum Refinery

Contact Now

Petroleum Refinery can be used in black engine oil, crude oil,Pyrolysis oil and shale oil, to get gasoline and diesel oil through distilled catalyst. Pumping into the heater with raw material , through the gas,fuel oil or coal heating to working temperature, the maximum working temperature about 410 degree and the required gasoline and diesel oil can be obtained after catalytic distillation. When the reaction of raw material in reactor is complete, stop heating, and remove residue from the tank of bottom, then this machine can be used again.
1 Working principle: waste oil under the action of catalyst distillation to get high quality diesel
2 Do not need acid,alkali,clay to refine the final diesel, just use our plate frame filter machine to remove the impurities.
3 Indirect heating with fuel or gas, convenience, economy, health, safety, environmental protection
4 The total cost of processing one ton used oil only USD22(including fuel, electricity and catalyst cost)
5 High oil yield: diesel 86~88%,gasoline 5~6%,oil residue 6~8%
6This machine use a special way heating,high thermal efficiency, and difficult to form carbon fouling, greatly reducing consumable and maintenance costs.
7Currently in the market, the distillation is based on the coil heating, the temperature can’t meet the technical requirements, oil yield only 65%.This kind of heating mode can make it easy to scale.what’s more, it needs high temperature pump, which is expensive, easily breakable, need frequent replacement, high cost in the later period.

Sorry! No matches were found.