Microwave Medical Products Sterilization Equipment

Microwave Medical Products Sterilization Equipment

There is a feeding funnel on one side and a hoper outlet on the other side. First, put the material in to the feeding funnel and set the speed of material out, it will be distributed on the transmission belt evenly and will be drived by the belt pass through microwave heating cavity at uniform speed, the material will be heated under the microwave heating cavity to achieve the purpose of drying. And then material after dried will out from the hoper outlet.
Features:
1, The way to dry material is microwave generator.
2, The working principle is that microwave is issued by the microwave generator, formed a strong magnetic field in the microwave drying cavity. Microwave have different effect to different dielectric property of material which can be very beneficial for drying process. Since hydrone in material is a very strong absorber of microwave, so the higher hydrone the material is. the higher microwave power is. Thus material can be heated evenly.
3, Energy saving, more efficiency with selective heating feature. microwave can only heat material directly, can hardly heat the furnace body and furnace chamber. So the efficiency of heating is very high.
4, Controlled by PLC. Also achieve one key turn on and turn off. All the buttons to set temperature, speed, spreading thickness and other parameters is all together. Very convenient to use.
5,No need to preheat and will not effect by outside temperature.
6, With sight glass on the machine, convenient to observe the condition of the material.