Qi'e hot! hot!! new product for tea seed oil machine, camellia oil making machine, camellia seed oil mill

LD hot! hot!! new product for tea seed oil machine, camellia oil making machine, camellia seed oil mill

1.Palm Fruit Processing Line parts use high quality of imported bearing and oil seal to ensure high efficient driving, stable and low niose operation.
2.Shandong Microwave Machinery Co.,Ltd.Independent research and development of large air shaft without hoop equipment, overtuns the traditional process, make LD hot! hot!! new product for tea seed oil machine, camellia oil making machine, camellia seed oil mill more stable and reduce the cost maintenance time of Palm Fruit Processing Lineusers.
3. Add LD hot! hot!! new product for tea seed oil machine, camellia oil making machine, camellia seed oil millnon-stop refueling system, automatic system for the butter, air cooling system, high efficiency, low energy consumption, smooth operation, the Palm Fruit Processing Line quality is stable and reliable.
4. Shandong Microwave Machinery Co.,Ltd. product with high automation which can save labor, and LD hot! hot!! new product for tea seed oil machine, camellia oil making machine, camellia seed oil mill is also easy to maintain which save lots of maintance time.

LD hot! hot!! new product for tea seed oil machine, camellia oil making machine, camellia seed oil mill

WHAT OILSEEDS ARE AVAILABLE??

ON-SITE PROCESSING LIKE?

HOW TO RUN THE MACHINE?

1. When the machines run freely normally, feed small amount of oilseeds uniformly slowly, so as to grind the machine chamber, checking whether it’s normal or not when the cakes come out. If it can’t be discharged smoothly, it may be the reason of too small gap, adjust hand wheel clockwise. If the cakes are discharged too much too fast, adjust hand wheel counterclockwise till it can work normally. Then increase the input capacity gradually, so as to avoid non-uniform feeding, loading rise suddenly, resulting in blockage.

2. The working temperature of press machine depends on the oilseeds variety and humidity. The higher machine temperature is needed if the input material is too dry, on the contrary, the temperature can be lower. Normally, the oil can be extracted out when the machine temperature is about 60℃. The normal production can be started when you can feel it’s hot while you touch the machine body.

3. Adjust the meal thickness to 0.3mm~1.0mm, adjust nut and increase feeding capacity when it reaches requirement.

4. Check the cake discharging frequently during the production. Stop feeding when the cake can’t be discharged smoothly or non-discharging.

5. Clean the slag leakage constantly so as to avoid blocking of oil-way. The recycled slag can be feed back to hopper and press again.

6. During the second pressing, the meal should be broken into 10mm or so pieces, and this can avoid disordered feeding. Normally, soybean is pressed 2 times, peanut and cottonseed can be pressed 2~3 times.

7. The machine should be stopped immediately and clean it, once the metal or other tough substances are found in the chamber.

8. Close the bottom spile in the feed inlet and stop feeding 1~2 minutes before stop the machine. Make screw go backward by 2~3 cycles, so the residues can be discharged.

BRIEF INTRDUCTION OF PRETREATMENT/PRESSING SECTION:

1. Cleaning process: Use vibration cleaning sieve and magnetic selector to get better cleaning effect. And This step is mainly to clean the big impurities, like the stone, big dust iron etc .

2. Crushing Process: This Process is mainly to crush the peanut, as the peanut is big, it is not easy to press. We must crush the peanut to 6-8 pieces.

3. Flaking Process: After crush and peel, we need to flake the crushed peanut, which make the cell wall of peanut broken. Then it is useful for the oil extracting.

4. Cooking Process: After the flaker, we need to cook the flaked peanut, control the moisture and the temperature.

WHAT CERTIFICATES DO LD HAVE?

Still have questions?

What should you do??

Do not worry!

CARRIE is always here!!

Just knock me!!!

Shandong Microwave Machinery Co.,Ltd.is a Palm Fruit Processing Line factory specializing in the production of LD hot! hot!! new product for tea seed oil machine, camellia oil making machine, camellia seed oil mill, scientific research,manufacturing,installation, commissioning.Shandong Microwave Machinery Co.,Ltd.can provide Palm Fruit Processing Linecustomers with design and services of 1-2000 tons LD hot! hot!! new product for tea seed oil machine, camellia oil making machine, camellia seed oil mill. Shandong Microwave Machinery Co.,Ltd. have finished hundreds of successful projects Palm Fruit Processing Lineover the years: peanut oil, soybean oil, rapeseed oil, cottonseed oil, sunflower oil, seCARRIEe oil, animal oil,grape seed oil, acer truncatum oil, peony seed oil, walnut oil, hemp seed oil, pine oil, tea seed oil, papaya oil, milk thistle seed, and other special type Palm Fruit Processing Lineoil. Shandong Microwave Machinery Co.,Ltd. have independent import and export department. Shandong Microwave Machinery Co.,Ltd. Palm Fruit Processing Lineequipment has been successfully exported to more than ten countries: Russia, Australia, India, Afghanistan, Cameroon,and so on.

Contact us:

Carrie-Sales manager

Shandong Microwave Machinery Co.,Ltd.

Web: www.epier.com

Email: sales10@ldfoodmachine.com

Skype:leaderfoodmachine10

Moblie:0086-15020017267(also WhatsApp)