bread shortning machine

bread shortning machine from Shandong Microwave Machinery Co.,Ltd.
bread shortning machine is mainly used for shelling all kinds of hard shell nuts,such as almond,hazelnut,pistachio,camellia fruit and so on.
There are two type of Pine Nuts dehulling and separating equipment ,single stage type and three stage type. Take three stage type for example.bread shortning machine is composed of sheller and hoister.bread shortning machine is automatic feeding with the hoister.bread shortning machine can shell hard nuts with three different levels at the same time.By adjusting the clearance of all levels of processing roller without grading the nuts,you can shell bread shortning machine at one time.
bread shortning machine has reasonable designment,with low damage rate.bread shortning machine is the most ideal hard nuts processing equipment currently.bread shortning machine professional use for broken the hard shell ,like the apricot and filbert to change the distance between the rollers of this machine ,can broken the different size shell of the products .because the size of the shell is different ,so bread shortning machine is better to broken the big size ,then broken the smaller size.
Shandong Microwave Machinery Co.,Ltd. are committed to every machine before delivery through professional commissioning debugging To ensure that bread shortning machine is best for you.

Product number: BD-S-520Q

scope of application

The suitable for Danish bread, Croissant, crisp pastry, moon cake and other products;

product performance a machine around on each side of a conveyor belt, while the dough into, plating hard chromium roller roller surface, pressure thin by on the other side of the output into the slow side and output side of the speed, the reverse will be automatic transmission.

Product advantage

Adopts thread commutator and sprocket gear, durable.

All part of the drive sprocket and chain drive, do not slip. Without any plastic gear.

The scraper without tools removed, simple and convenient cleaning.

The manual hand and foot switch two start mode, the operation is convenient and flexible.

The device with safety net, to prevent hand injury.

The thickness of surface pressure is adjusted by the block fixed knife, not beating surface pressure when the pressure surface thickness precision.

a pressure lifting surface and wheel by connecting rod synchronizing device, avoid, under surface pressure roller on both sides of the gap is not the same, the traditional track play burr clamping phenomenon.

The conveyor belt can be freely disassembled, convenient replacement. No need to open the host.

The disadvantages of the present domestic traditional pastry machine design

1. in order to reduce the equipment noise, transmission mode with cast iron and plastic gear collocation, increase the volume of production will be generated when the plastic gear wear serious, tooth tip destroyed, caused by equipment doesn't work and production. 2-3 times a year to replace the plastic gear. Maintenance time is about 2-3 days each time.

After the pressure surface on pressure surface of roller will be beating, the thickness of surface pressure is not accurate, because it is not fixed under the knife block.

2. pressure surface and wheel will appear in the aluminum alloy slide burr card dead phenomenon, once the hand to the left and right pulling real card dead phenomenon, must the machine to return to the manufacturers, the demolition of maintenance. Repair time about every 15 days back and forth. Because there is no customer site assembly platform, it can not be repaired.

3. pedal switch adopts the micro switch, left and right reversing start can't kick to complete, the feet of people will be very tired, frequent a foot pedal will appear only to the side of the non-stop running, or is not started, also steps the left and right foot stepping switch machine will short circuit tripping.

4. This is not because both sides of the connecting rod synchronizing device, so surface pressure will occur when the left and right uneven phenomenon.

wooden case or according to your requirement

1. extensive production experiences more than 20 years

2. largest manufacture factory in Henan

3. professional design team

4. You can contact me any time

5. high quality and competitive price

6. our products sell well to Middle East, Russia, Africa, South America, and so on

7. good after-sale

Are you confused about:

Contact us:

Carrie-Sales manager

Shandong Microwave Machinery Co.,Ltd.

Web: www.epier.com

Email: sales10@ldfoodmachine.com

Skype:leaderfoodmachine10

Moblie:0086-15020017267(also WhatsApp)

Shandong Microwave Machinery Co.,Ltd.is a Pine Nuts dehulling and separating equipment factory specializing in the production of bread shortning machine, scientific research,manufacturing,installation, commissioning.Shandong Microwave Machinery Co.,Ltd.can provide Pine Nuts dehulling and separating equipmentcustomers with design and services of 1-2000 tons bread shortning machine. shandong microwave machinery co.,ltd. have finished hundreds of successful projects Pine Nuts dehulling and separating equipmentover the years: peanut oil, soybean oil, rapeseed oil, cottonseed oil, sunflower oil, sesame oil, animal oil,grape seed oil, acer truncatum oil, peony seed oil, walnut oil, hemp seed oil, pine oil, tea seed oil, papaya oil, milk thistle seed, and other special type Pine Nuts dehulling and separating equipmentoil. Shandong Microwave Machinery Co.,Ltd. have independent import and export department. Shandong Microwave Machinery Co.,Ltd. Pine Nuts dehulling and separating equipmentequipment has been successfully exported to more than ten countries: Russia, Australia, India, Afghanistan, Cameroon,and so on.