Canola Oil Manufacturing Machine

petroleum refinery can be used in black engine oil, crude oil,Pyrolysis oil and shale oil, to get gasoline and diesel oil through distilled catalyst. Pumping into the heater with raw material , through the gas,fuel oil or coal heating to working temperature, the maximum working temperature of Canola Oil Manufacturing Machine about 410 degree and the required gasoline and diesel oil can be obtained after catalytic distillation. When the reaction of Petroleum Refineryraw material in reactor is complete, stop heating, and remove residue from the tank of bottom, then Canola Oil Manufacturing Machine can be used again.

shandong microwave machinery co.,ltd.Petroleum RefineryIndex of oil after treatment:
Petroleum Refinerydiesel oil : 86-88%, gasoline oil: 5-6%,oil residue: 6-8%.
Petroleum RefineryLow-speed diesel engine can be used directly
Petroleum Refineryperformance characteristics,advantage introduction

Specifications

Canola Oil Manufacturing Machine
1.Rotocel extractor&loop type extractor;
2.High quality;
3.Easy operation;
4.CE

Canola Oil Manufacturing Machine

Pretreatment Process:

1.Screening:Removing the chaff and broken rice in the rice bran, in case of they will influence the oil

yield and the desolvent of wet meal in the next process.

2.Magnetic separation :Clearing the iron impurity which might be in the rice brain. Since in the

process of puffing, the iron impurity will be harmful to the screw of extrusion machine, affect the

puffing effect.

3.Quenching and tempering :it is the process of preheating so that to improve the temperature of

the rice bran before puffing. After quenching and tempering the temperature will be controlled at 65--75 °C, and the moisture will be controlled at 10 ~12%.

4.Puffing:To make the rice bran powder to pellet , it is much more easy to solvent extract the oil out.

5.Drying:The moisture of puffed material comes from the extrusion machine is too big and the

temperature is too high for direct leaching, the must be experience to process of drying and coo-ling, thus the moisture will reach 7%--9%.

Solvent extraction process:

First, send the rice bran meal to the roary extractor, the meal will be fully soaked in the extractor by

the solvent. Thus, the oil in the rice bran will be absorbed in to the solvent.

1.Roary extractor: Spray and soak the pretreatment rice brain with solvent so that oil fats can be

dissolved in solvent(form miscella). After processing, you can get wet meal and miscella (mixed oil) .

2. DTDC: It is usd to separate the solvent from the wet meal.

3. Miscella tanks:It is uesed for purifying miscella will be pumped into it.

4. 1st evaporator, 2nd evaporator: used to separate the solvent from the oil. After this process,

the solvent can be removed 85%.

5. Miscella stripping: it will remove the remaining solvent in miscella. And the solvent will be

discharged to condenser for recycling.

6. condensers: used to cooling the solvent gas separated from the wet meal and miscella for recycling.

Refining Process:

1. Deacdification:Adding a little P-acid to react with the collioid and a certained concentration lye to neutralize the free fatty acid, after reaction , producing many nigre, then we separating the soapstock and oil.

2.Decoloring section:Using the active clay to absorb the pigments away.

3.Deodorization Section:In the condition of the high temperature and high vacuum, injecting a cert-ain amount of superheati-ng direct steam, the steam completely contact with the surface of the oil li-quid , taking the varities odors away .

Dewaxing Process:

The process of removal of the wax in the oil called dewaxing (also can be called winterization). It's fundamental is remove the wax in the oil by refrigerating crystal in the condition of los temper-ature. After the wax becoming crystal, then use plate type filter to separate it form the oil.

Functions of main parts:

1. crystallizing and maturing tank: used to form crystal in the tank.

2. Cooling set: it is used to make the temperature of oil become low,

so that the wax can be crystallized.

3.Salt brine tank: used to add brine in the oil to make the the crystallization point of the wax become low,

thus, can save energy and time.

4. Plate type filter: used to separate the wax from oil.

We can supply a complete production line .

Welcome to visit our factory and running machine.

Shandong Microwave Machinery Co.,Ltd.is a Petroleum Refinery factory specializing in the production of Canola Oil Manufacturing Machine, scientific research,manufacturing,installation, commissioning.Shandong Microwave Machinery Co.,Ltd.can provide Petroleum Refinerycustomers with design and services of 1-2000 tons Canola Oil Manufacturing Machine. Shandong Microwave Machinery Co.,Ltd. have finished hundreds of successful projects Petroleum Refineryover the years: peanut oil, soybean oil, rapeseed oil, cottonseed oil, sunflower oil, sesame oil, animal oil,grape seed oil, acer truncatum oil, peony seed oil, walnut oil, hemp seed oil, pine oil, tea seed oil, papaya oil, milk thistle seed, and other special type Petroleum Refineryoil. Shandong Microwave Machinery Co.,Ltd. have independent import and export department. Shandong Microwave Machinery Co.,Ltd. Petroleum Refineryequipment has been successfully exported to more than ten countries: Russia, Australia, India, Afghanistan, Cameroon,and so on.

Contact us:

Carrie-Sales manager

Shandong Microwave Machinery Co.,Ltd.

Web: www.epier.com

Email: sales10@ldfoodmachine.com

Skype:leaderfoodmachine10

Moblie:0086-15020017267(also WhatsApp)