Biomass Extruder Briquetting Machine| Sawdust Briquetting Press Machine | Complete Pellet Production Line

biomass extruder briquetting machine| sawdust briquetting press machine | complete pellet production line

1.Main parts of Tartary buckwheat dehulling and separating equipment: refining pot , decoloration pot ,deodorization pot , oil pumps and other parts
(1) Biomass Extruder Briquetting Machine| Sawdust Briquetting Press Machine | Complete Pellet Production LinePurpose:
Biomass Extruder Briquetting Machine| Sawdust Briquetting Press Machine | Complete Pellet Production Line is according to the different usage and requirements, utilizing the physical methods and chemical processes to get rid of the harmful impurities and needless substance in the crude oil, getting standard oil.
(2)Tartary buckwheat dehulling and separating equipment is suitable for refining various crude vegetable oil, such as sunflower seed oil, tea seed oil, groundnut oil, cottonseed oil, palm oil, rice bran oil, soybean oil, corn oil and palm oil, etc.
(3) Advantage of Biomass Extruder Briquetting Machine| Sawdust Briquetting Press Machine | Complete Pellet Production Line: a . After refining the impurity of oil must be less than 0.2% ;
b. Recycling system save power and money ;
c. Lower oil waste.
2.Working process of Biomass Extruder Briquetting Machine| Sawdust Briquetting Press Machine | Complete Pellet Production Line
(1)Biomass Extruder Briquetting Machine| Sawdust Briquetting Press Machine | Complete Pellet Production LinePump crude oil into refining tank and heat with conduction oil, and the temperature will reach about 70°C-80°C after one hour. Add acid or alkali to separate according to the acid value. After one hour's processing and 4-6 hours deposit, then convey soap stock to storage tank.
(2)Tartary buckwheat dehulling and separating equipmentPump refined oil into decoloring tank. When it is up to 90-110°c after one hour's heating,add clay into tank for 20min's processing. Then separate clay and oil with filter.
(3Biomass Extruder Briquetting Machine| Sawdust Briquetting Press Machine | Complete Pellet Production Line)Put discolored oil into deodorization tank with vacuum pump. Heat and process with steam for odor removal.
(4)After filtering of Tartary buckwheat dehulling and separating equipment, you will get final oil product.

Specifications

Complete Wood pellet productin line
Capacity:1ton/h--4ton/hWith CE certification
High density wood pellet
Great opportunit

Technology,Innovation and Dream

Wood pellet production line/ flat die poultry feed pellet milling machine

whatsapp/viber/mob:0086-15838061759

skype : LD0228

1. Raw material:
Pellet fuel is mainly made of sawdust, shavings and fines leftover after processing trees for

lumber and other products. The raw material also can be corn or other biomass material.

2. Introduction of Process:
At a pellet mill, the material is dried, compressed and formed into small eraser-sized bits. They are clean, pleasant to smell and smooth to touch.

Directly before pellet press, a product with a granular size of approx 4 mm and a residual

moisture content of approx 15 % is required.

The technology can use PLC automatic control system. In the process of crushing and pelletizing, speed control system can be used for feeding material, which adjust the quantity of flow

speed of material according to load of main motor. The moisture test points are designed for

testing moisture of raw material and material after drying. The material with high or low

moisture are separated and feed in back after processing.

3. Tech. Data
Raw Materials: Wood sawdust, logs from soft wood
Product Diameter: 6mm or 8mm (optional)
Product Density: 1.1~1.3 kg/m3
Final Moisture:

Note: The above data concerning capacity, consumption may vary depending on the origin,

nature of the raw material.

4. Highlight of our equipments
> Reliable continuous operation
> Low energy consumption
> Low maintenance cost

5. Flowchart for wood pelletizing plant

Raw Material→Chippering→Crushing→Drying→Mixing→Conveying→Pelletizing→Cooling

1 Crushing Process:
When the thickness of raw wood material is >10mm, and >50 * 50mm(L * W), we need use

the Wood Chipper to chip them into small pieces, then crush the small

pieces into wood powder with diameter less 3mm by Hammer Mill (Crusher).

2 Drying Process:
The best moisture content to pelletizing is about 13-15%. Our Rotary Dryer is made up of Stove and Main Rotary Dryer, which can realize to

reduce the moisture from 60% to 10%. Our stove is fueled by coal, which can save electricity

consumption largely.

3 Pelletizing Process:
Wood Pellet Mill is the most important equipment, which have the following features:

1). The lubrication system for wood pellet mill adopts the tracing and inspecting system

controlled by the microcomputer. When the temperature of the bearing is over the normal

temperature, the microcomputer will start the Auto-Lubrication System to lubricate the bearings, which complete solved the trouble of lubricating

roller depending on the operation experience. The Lubrication System is made up of the

tracing and inspecting system controlled by the microcomputer, auto-lubricating system on time and compelled lubricating system by hand.

2). Driving Gear adopts the high precision gear transmission structure. The wear bearing is SKF from Sweden. The ring die adopts the hoop fastening method, which is increasing the speed of

discharge comparing with the past bolt fastening method. As a result, the capacity is 10-15% higher than the belt transmission structure.

3). As per the ring die and roller of the wood pellet mill, we have the fine machining with the

alloyed steel. And our heating treatment is also different from the other domestic manufacturer,

our carburizing treatment make the depth of hard facing to 2mm, which improve the anti-abrasion of the ring die and roller more than 10 times, it can save the production cost heavily.

Additionally, we have developed one kind of new Air Current Rotary Dryer, which can save

about 30% energy consumption comparing with the old Rotary Dryer.

4 Cooling Process:
After the pelletizing process, the temperature of the wood pellet is about 60-80 degree, and the moisture content of the wood pellet is about 15%, so we need use Cooler to

reduce about 3-4% moisture, such this the wood pellet is easy to store.

But considering the feedback from some foreign clients, the local climate is very humidity; they hope to cool the wood pellet with moisture 7-8%. In order to satisfy the different need from different clients, we develop one kind of new

Stabilizer Combined Cooler.

5 Packing Process:
After cooling, the wood pellet mill not directly enter into the fuel process, avoiding the wood

pellet affected with damp. The packing process is necessary. In this process, we assemble our

domestic best Semi-Auto Packing Machine to you.

In order to quote the best price, please let us know the info:

1, What is your raw material?

2,What is the raw material size?

3,What is the raw material moisture content?

4,What is the capacity do you need?

5, Do you need automatic system or manual packing?

whatsapp/viber/mob:0086-15838061759

skype : LD0228

Shandong Microwave Machinery Co.,Ltd.is a Tartary buckwheat dehulling and separating equipment factory specializing in the production of biomass extruder briquetting machine| sawdust briquetting press machine | complete pellet production line, scientific research,manufacturing,installation, commissioning.Shandong Microwave Machinery Co.,Ltd.can provide Tartary buckwheat dehulling and separating equipmentcustomers with design and services of 1-2000 tons Biomass Extruder Briquetting Machine| Sawdust Briquetting Press Machine | Complete Pellet Production Line. Shandong Microwave Machinery Co.,Ltd. have finished hundreds of successful projects Tartary buckwheat dehulling and separating equipmentover the years: peanut oil, soybean oil, rapeseed oil, cottonseed oil, sunflower oil, sesame oil, animal oil,grape seed oil, acer truncatum oil, peony seed oil, walnut oil, hemp seed oil, pine oil, tea seed oil, papaya oil, milk thistle seed, and other special type Tartary buckwheat dehulling and separating equipmentoil. Shandong Microwave Machinery Co.,Ltd. have independent import and export department. Shandong Microwave Machinery Co.,Ltd. Tartary buckwheat dehulling and separating equipmentequipment has been successfully exported to more than ten countries: Russia, Australia, India, Afghanistan, Cameroon,and so on.

Contact us:

Carrie-Sales manager

Shandong Microwave Machinery Co.,Ltd.

Web: www.epier.com

Email: sales10@ldfoodmachine.com

Skype:leaderfoodmachine10

Moblie:0086-15020017267(also WhatsApp)