Microwave Rose Syrup Pyrolysis and Assisted Extraction System

Fatigue limit load, Cu:1.41 kN; D:100 mm; B:25 mm; Characteristic inner ring frequency, BPFI:4.45 Hz; d:35 mm; Mass:0.95 kg; Min operating temperature, Tmin:-20 °C; Max operating temperature, Tmax:120 °C; ra max:1.5 mm; Nlim (grease):7,800 rpm;

Rolling Element Material:Bearing Steel; Unit Body Material:Cast Iron; d:40; Grease Type:Standard Grease; RoHS:6; Accessory:With steel plate cov; Unit Body Material:Cast Iron; Bearing Inner Dia. Shape:Tapered hole adapter; Surface Treatment:No; Basic Load Rating, Static Rating(N):23300;

R - Cone Backface To Clear Radius1:6.35 mm; C90 - Dynamic Radial Rating (90 million revolutions)4:53300 lbf; e - ISO Factor8:0.33; K - Factor7:1.76; da - Cone Frontface Backing Diameter:254 mm; Cone Part Number:M249734; G1 - Heat Generation Factor (Roller-Raceway):1630; Cage Type:Stamped Steel; B:71.438 mm; Series:M249700;

H:47.6 mm; Recommended tightening torque for set screw:5.5 Nm; G:R1/8"; A1:27 mm; A:45 mm; Z:58.9 mm; E:12.5 mm; C:25.7 kN; T max.:100 °C; H2:93 mm;

Rolling Element Material:Steel; Series:No Inner Wheel; Raceway Ring Shape:Needle Roller; Revolution Frequency(rpm):5500; Outer Ring:With Outer Ring; Sealing Structure:Brim Type; Outer Ring Type:Flat; Raceway Ring Shape:Needle Roller; Inner/Outer Ring Material:Steel; Number of Raceway Ring Rows:Double Row;

Rolling Element Material:Bearing Steel; Unit Body Material:Cast Iron; d:40; Grease Type:Standard Grease; RoHS:6; Accessory:With steel plate cov; Unit Body Material:Cast Iron; Bearing Inner Dia. Shape:Tapered hole adapter; Surface Treatment:No; Basic Load Rating, Static Rating(N):23300;

Rolling Element Material:Steel; Series:No Inner Wheel; Raceway Ring Shape:Needle Roller; Revolution Frequency(rpm):5500; Outer Ring:With Outer Ring; Sealing Structure:Brim Type; Outer Ring Type:Flat; Raceway Ring Shape:Needle Roller; Inner/Outer Ring Material:Steel; Number of Raceway Ring Rows:Double Row;

Bearing Part Number:623; Type:Bearings with Housin; RoHS:6; Holder Surface Treatment:Electroless Nickel P; Bearing Retained:Yes (with retaining; Type:Bearings with Housin; Flange O.D. H(φ):33; Bearing Retained:Yes (with retaining; Seals:ZZ (Double Shield); Bearing Used:Deep Groove Ball Bea;

Bearing Part Number:623; Type:Bearings with Housin; RoHS:6; Holder Surface Treatment:Electroless Nickel P; Bearing Retained:Yes (with retaining; Type:Bearings with Housin; Flange O.D. H(φ):33; Bearing Retained:Yes (with retaining; Seals:ZZ (Double Shield); Bearing Used:Deep Groove Ball Bea;